Ginger

Ginger is a 50-foot daysailer smack in the middle the Spirit-of-Tradition narrative. She’s a mix of a long, low sheer right out of classic dayboats from the 1930’s, with efficient modern appendages, carbon spars and hardware. The key here is the sexily modern ergonomic cockpit and contemporary sail inventory. Our favorite touch? The super-clean deck, brought about by running most lines belowdeck through carefully-routed conduits.

Materials: Cold-molded wood, four layers: inner layer 3/8″ Port Orford cedar strip planking over laminated fir frames; two layers diagonal 1/8″ western red cedar, outer layer 3/16″ Port Orford cedar, running fore-and-aft. Sheathing of 10 oz fiberglass/epoxy. Awlgrip paint system. Deck: Teak Decking Systems panelized teak deck, laid over plywood sub-deck. Mast and Boom: carbon, by Ted Van Dusen (Composite Engineering, Inc.) Standing rigging: Hall carbon. Sails: Stratis, by Doyle. Rudder: carbon, by Composite Solutions, Inc. Engine: 12-hp Saildrive 330 Winches/hardware: Harken

Built by: Brooklin Boat Yard, 2001Watch the video

LOA: 50ft 0in (15.24m)
LWL: 36ft 5in (14.15m)
BEAM: 10ft 0in (3.05m)
DRAFT: 8ft 0in (2.44m)
POWER:15 hp Saildrive 330

DISPLACEMENT: 9,600lb (4,354kg)
SAIL AREA: 783sq ft (72.74sq m)
SA/D RATIO: 27.7
D/LWL RATIO:92